JOINT APPRENTICESHIP & TRAINING PROGRAM
Applicant Trade Experience Report
*NOTE
- all dates must be entered in the 00/00/00 format.
Name:
Address:
(County)
(City)
(State)
(Zip)
Phone:
Are you currently working?
...
Yes
No
Previous / Current Employer:
Length of Trade Experience:
Years,
Months
Companies and time spent with each:
Type of Jobs worked on - Approximate Time:
Schools:
Powerhouse:
Hospitals:
Shop Work (Prefabrication):
Industrial Plants:
Light Manufacturing:
List the Materials you have applied to the following items:
Straight Pipe Runs
Pipe Bends, Elbows, Valves, Tees, Etc.
Special shaped equipment & vessels: Tanks, Pumps, Hot water generators, Exchanges, Chillers, Etc.
Duct work and Breechings
Check the jobs you have performed:
1.
Hot application of preformed pipe or block insulation
To straight piping
To pipe bend, elbows, valves, etc.
To vessels and special-shaped equipment
2.
Cold application of preformed pipe or block insulation
To straight piping
To pipe bend, elbows, valves, etc.
To vessels and special-shaped equipment
3.
Application of flexible insulation/Duct wrap & etc.
To straight piping
To pipe bend, elbows, valves, etc.
To vessels and special-shaped equipment
Rigid board to ducts, elbows & bends
4.
Application of sealing compounds in relation to
To straight piping
To pipe bend, elbows, valves, etc.
To vessels and special-shaped equipment
5.
Mixing and application of wet composition to pipe work and equipment
First and second-coat work
Finishing coats (Including quick-setting cements)
6.
Finish of insulation with sheet-metal
To straight piping
To pipe bend, elbows, valves, etc.
To vessels and special-shaped equipment
Prefabrication of sheet metal, for elbows, tees, valves and etc.
7.
Application of fireproofing materials to steelwork
8.
Wrapping with ceramic fibers, cloths and similar materials
9.
Fitting of insulation supports
Pin welding
Stud welding
Independent framework, roadmesh, poultry netting
10.
Application of canvas and glass cloths
To straight piping
To pipe bend, elbows, valves, etc.
To vessels and special-shaped equipment
11.
Use of power tools
Band saws (Shop fabrication)
Drills, others
12.
Use of spraying euipment for mastics
13.
Use of spray equipment for urethanes for cold work
14.
Other work not covered by all of the above list below
Copyright © 2003-2012 Insulators Local 23
Back to Top
